RadiCS Quality Control Software
From calibration to asset management, acceptance and constancy testing, RadiCS offers complete QC management control for accurate and consistent diagnostic imaging.
Precise Calibration
Monitor QC is critical to the maintenance of precise diagnostic imaging, and periodic calibration is essential to maintain constancy in image display. EIZO offers QC software RadiCS and sensors (GX2 for monochrome monitors, RX1 for color monitors) with a user-friendly interface in a unified QC management tool. It performs highly efficient and precise calibration to the DICOM Part 14 standard, and rectifies changes in characteristics caused by prolonged use.
Acceptance and Constancy Testing
When installing or exchanging a monitor, acceptance testing is necessary to confirm proper image display, and periodic checks are indispensable during use. RadiCS can runs tests for pattern, luminance, grayscale, and uniformity according to two acceptance standards (AAPM and DIN) and four constancy standards (AAPM, DIN, IEC and JIS). Moreover, the step-by-step window explanations make all these operations easy.
QC Data Records
The QC data results of each individual monitor is logged and made available for future reference.
Asset Management
Model names, medical institution name, installation places and other information of each monitor, PC, and graphics boards can be registered and available for future consultation.
Self-Calibration and Self-Diagnosis
Using the original factory setting data of each individual monitor and the backlight sensor in RadiForce monitors, RadiCS can perform ``self-calibration`` and ``self-diagnosis`` With the ``self-calibration`` function, RadiCS can perform brief calibration without using an external sensor. With the ``self-diagnosis`` function, the monitor will display a message requesting re-calibration, when luminance instabilities occur. This function can also be set to run periodically using the scheduling functions.
RadiCS GX2 Quality Control Tool for Monochrome LCD Monitors
With the RadiCS GX2, medical and IT professionals can perform a wide range of quality control tasks to ensure stable and consistent display among monochrome RadiForce monitors.
Features
- Acceptance testing to DIN 6868-57and AAPM TG-18 standards.
- Constancy testing to DIN 6868-57, AAPM TG-18, IEC 61223-205, and JIS Z4752-2-5 standards.
- Calibration to the DICOM Part 14 standard.
- Control of monitor`s built-in sensor to automatically correct changes in brightness and tone characteristics.
- Scheduler for pattern, luminance, grayscale, uniformity, and self-diagnostic checks.
- Manufacturer-independent asset management of the PC, graphics boards, and monitors.
RadiCS RX1 Quality Control Tool for Color LCD Monitors
With the RadiCS RX1, medical and IT professionals can perform a wide range of quality control tasks to ensure stable and consistent display among color RadiForce monitors.
Features
- Acceptance testing to DIN 6868-57and AAPM TG-18 standards.
- Constancy testing to DIN 6868-57, AAPM TG-18, IEC 61223-205, and JIS Z4752-2-5 standards.
- Calibration to the DICOM Part 14 standard.
- Control of monitor`s built-in sensor to automatically correct changes in brightness and tone characteristics.
- Post-calibration adjustment of gamma values with ToneCurve Tuning Utility.
- Scheduler for pattern, luminance, grayscale, uniformity, and self-diagnostic checks.
- Manufacturer-independent asset management of the PC, graphics boards, and monitors.
Clip On Swing Sensor G1
With RadiCS and RadiNET Pro, medical and IT professionals can perform remote calibration to ensure stable and consistent display among RadiForce monitors.
Features
- Attachable to the monitor bezel with a USB connector.
- Calibration to the DICOM Part 14 standard.
- Remote calibration can be performed with network QC management software RadiNET Pro version 2.00 and later.
|
|
